NEW FABRICATED POLISHED ALUMINUM WINDSHIELD WASHER TANK WITH CAP, RECTANGLE, 4.2 PINTS, 68 OUNCES, CAN BE USED FOR RADIATOR EXPANSION OR WATER METHANOL INJECTION RESERVOIR

Print this page
fallback-no-image-902
  • ID: #902
  • Add Favorites
  • Availability: 10 In Stock
  • $99.99

Brand New Southwest Speed Tig Welded Fabricated Windshield Washer or Water Methanol Injection Reservoir that holds 4.2 Pints (68 ounces).

  • Features a Polished Aluminum Finish that accepts a 3/8″ (10mm) push in tube in the center of the bottom of tank, and fits many applications requiring a tank of similar dimensions.
  • This reservoir pushes down on a 3/8″ (10mm) tube and then bolts into place using the 2 brackets that are tig welded to the side of the reservoir.
  • The brackets have 1/4″ (6mm) mounting holes on a 4 1/4″ bolt center.
  • This reservoir is designed to replace the plastic molded factory tanks and add styling to most vehicles (SWS Part # 410-4005).

This Southwest Speed fabricated windshield washer reservoir and water methanol injection tank is universally engineered to fit many applications due to it’s compact size.

  • This tank is direct fit windshield washer tank on some GM and Holden vehicles, but can be used for water methanol injection for many other applications running water methanol injection.
  • This tank is fully tig welded and built to last, and replaces the molded plastic tank.
  • Supplied with a polished billet screw on cap, that seals with an o-ring.
  • This expansion tank holds 4.2 pints (68 ounces), and is in stock and ready to ship today.

Features:

  • Polished Billet Aluminum Screw-On Cap with sealing o-ring
  • Polished Aluminum Finish
  • Direct fit Windshield washer reservoir tank on some vehicles
  • Can be used as an Water Methanol Injection Tank for some applications
  • One 10mm hole in bottom of tank fitted with rubber grommet installed to accept a 3/8″ (10mm) push in tube
  • Universally Designed to fit most applications
  • Two Mounting brackets with 1/4″ (6mm) bolt holes, 4 1/4″ center to center
  • Holds 4.2 Pints (68 Ounces)
  • 8 1/2″ Long x 4 1/4″ Wide x 3 3/4″ Tall

  • Brand New Southwest Speed Tig Welded Fabricated Windshield Washer or Water Methanol Injection Reservoir that holds 4.2 Pints (68 ounces) > Features a Polished Aluminum Finish that accepts a 3/8″ (10mm) push in tube in the center of the bottom of tank, and fits many applications requiring a tank of similar dimensions
  • This reservoir pushes down on a 3/8″ (10mm) tube and then bolts into place using the 2 brackets that are tig welded to the side of the reservoir > The brackets have 1/4″ (6mm) mounting holes on a 4 1/4″ bolt center > This reservoir is designed to replace the plastic molded factory tanks and add styling to most vehicles (SWS Part # 410-4005)
  • This Southwest Speed fabricated windshield washer reservoir and water methanol injection tank is universally engineered to fit many applications due to it’s compact size > This tank is direct fit windshield washer tank on some GM and Holden vehicles, but can be used for water methanol injection for many other applications running water methanol injection
  • This tank is fully tig welded and built to last, and replaces the molded plastic tank > Supplied with a polished billet screw on cap, that seals with an o-ring > This expansion tank holds 4.2 pints (68 ounces), and is in stock and ready to ship today
  • Features > Billet Aluminum Screw-On Cap with sealing o-ring > Polished Finish > Direct fit Windshield washer reservoir tank on some vehicles > Can be used as an Water Methanol Injection Tank for some applications > One 10mm hole in bottom of tank fitted with rubber grommet installed to accept a 3/8″ (10mm) push in tube > Designed to fit most applications > Two Mounting brackets with 1/4″ (6mm) bolt holes, 4 1/4″ center to center > Holds 4.2 Pints (68 Ounces) > 8 1/2″ Long x 4 1/4″ W x 3 3/4″ T